Pioneer AVX-7600 - Manual (Page 6)

Display unit
1 DISPLAY button
Press to display various informations.
2 BACK LIGHT button
Press and hold to turn the backlight off.
Press again to turn the backlight on.
3 Ambient light sensor
Senses ambient light. This system automati-
cally adjusts the brightness of the display to
compensate for ambient light.
4 FLIP DOWN button
Press to turn the LCD panel horizontal tem-
porarily from upright position.
5 OPEN/CLOSE button
Press to open or close the LCD panel.
6 ENTERTAINMENT button
Press to switch between the background
displays.
7 WIDE button
Press to select a desired mode for enlarging
a 4:3 picture to a 16:9 one.
8 V.ADJ button
Press and hold to display the picture adjust-
ment menu.
9 Signal receptor
Receives signals from a remote control.
a ANGLE (+/) button
Press to change the LCD panel angle.
b RELEASE button
Move downward to remove the front panel
from this unit.
c AV SOURCE button
This unit is turned on by selecting a source.
Press to cycle through all the available
sources.
d RESET button
Press to return to the factory settings (initial
settings).
1 2 4 5 3
6
7
9 a b
8
c d
Whats Wh at
En
6
Section
03