Using the remote control, Installing the unit, Plugging in – Pioneer XW-NAC1 User Manual

Page 6: Before you start 01

Advertising
background image

Before you start

01

6

En

• Remove the battery if the unit isn’t going to

be used for a month or more.

• When disposing of used batteries, please

comply with governmental regulations or

environmental public instruction’s rules

that apply in your country or area.

• WARNING

Do not use or store batteries in direct

sunlight or other excessively hot place,

such as inside a car or near a heater. This

can cause batteries to leak, overheat,

explode or catch fire. It can also reduce the

life or performance of batteries.

Using the remote control

The remote has a range of about 7 m at an

angle of about 30º from the remote sensor.

Keep in mind the following when using the

remote control:

• Make sure that there are no obstacles

between the remote and the remote sensor

on the unit.

• Remote operation may become unreliable

if strong sunlight or fluorescent light is

shining on the unit’s remote sensor.

• Remote controllers for different devices

can interfere with each other. Avoid using

remotes for other equipment located close

to this unit.

• Replace the batteries when you notice a fall

off in the operating range of the remote.

Installing the unit

• When installing this unit, make sure to put

it on a level and stable surface.

Don’t install it on the following places:

– on a color TV (the screen may distort)

– near a cassette deck (or close to a device that

gives off a magnetic field). This may interfere

with the sound.

– in direct sunlight

– in damp or wet areas

– in extremely hot or cold areas

– in places where there is vibration or other

movement

– in places that are very dusty

– in places that have hot fumes or oils (such as

a kitchen)

Plugging in

After you’ve finished making all connections,

plug the unit into an AC outlet.

1

Plug the supplied power cord into the AC

IN socket on the back of the unit.

2

Plug the other end into a power outlet.

Important

• Before making or changing any

connections, switch off the power and

disconnect the power cord from the AC

outlet.

7 m

30°

30°

AC IN

AC IN

XW-NAC1_SYXJ.book 6 ページ 2010年3月10日 水曜日 午前11時46分

Advertising