Pioneer AVIC-F3210BT - Manual (Page 41)

3 Touch the entry you want.
The searched location appears on the map
screen.
= For the subsequent operations, refer to Set-
ting a route to your destination on page
43.
Searching for POIs by using
the data on the SD memory
card
Creating a customised POI is possible by
using the utility programme navgate FEEDS
which is available separately, on your PC. (nav-
gate FEEDS will be available on our website.)
Storing the customised POI properly and in-
serting the SD memory card enables the sys-
tem to use the data for searches.
1 Use the utility programme navgate
FEEDS to store customised POI data to an
SD memory card.
2 Insert an SD memory card into the SD
card slot.
= For details of the operation, refer to Insert-
ing an SD memory card on page 11.
3 Touch [Home] on the map screen and
then touch [Navigation].
= For details of the operations, refer to Screen
switching overview on page 22.
4 Touch [FEEDS].
The
“Select List” screen appears.
5 Touch the item you want.
The
“Select POI” screen appears.
6 Touch the POI you want.
The searched location appears on the map
screen.
= For the subsequent operations, refer to Set-
ting a route to your destination on page
43.
Selecting a location you
searched for recently
The places that you have set as destination or
waypoint in the past are automatically stored
in
“History”.
p The location is also stored when you touch
[ Scroll] in the location confirmation screen.
p If no location is stored in Destination His-
tory, you cannot select [ History]. (If you
perform a route calculation, you can select
[
History].)
p “History” can store up to 100 locations. If
the entries reach the maximum, the new
entry overwrites the oldest one.
1 Touch [Home] on the map screen and
then touch [Navigation].
= For details of the operations, refer to Screen
switching overview on page 22.
2 Touch [History].
The
“Destination History” screen appears.
3 Touch the entry you want.
The searched location appears on the map
screen.
= For the subsequent operations, refer to Set-
ting a route to your destination on page
43.
Engb
41
Chapter
07
Searc
hing
for
and
selecting
a
location
Searching for and selecting a location