Pioneer AVIC-F3210BT - Manual (Page 88)

p Pressing MULTI-CONTROL up or down en-
ables you to perform the equivalent opera-
tion.
3 Press the centre of MULTI-CONTROL to
play the selected track.
p Pressing MULTI-CONTROL right enables
you to perform the equivalent operation.
Setting a repeat play range
The repeat play range can be changed by
touching only one key.
% Touch repeatedly until the desired
repeat range indicator appears.
!
:
Repeats just the current track.
! No indicator (disc repeat):
Repeats the current disc.
p If you skip a track forward or backward
while the repeat play range is set to ,
the repeat play range changes to disc re-
peat automatically.
Playing tracks in random order
All of the tracks in the disc can be played at
random by touching only one key.
% Touch .
Random play begins.
When you turn random play on,
appears.
p To turn random play off, touch
again.
p If you touch
while the repeat play range
is set to , the repeat play range changes
to disc repeat automatically and tracks will
be played in random order.
Scanning tracks of a CD
Scan play lets you hear the first 10 seconds of
each track on the CD to search for a song.
% Touch .
Scan play begins.
After scanning is finished, normal playback of
the tracks will begin again.
p To turn scan play off, touch
again.
p If you touch
while the repeat play range
is set to , the repeat play range changes
to disc repeat automatically and scanning
tracks will begin.
p If you skip a track forward or backward dur-
ing scan play, the scan play is automatically
cancelled.
p If you touch
during scan play, the scan
play is automatically cancelled and play-
back of the current track will be repeated.
p If you touch
during scan play, the scan
play is automatically cancelled and tracks
will be played in random order.
Playback and Pause
% Touch .
Playback of the current track pauses, and
“Pause” is displayed.
p To turn pause off, touch
again.
Using Sound Retriever
Sound Retriever function automatically en-
hances compressed audio and restores rich
sound.
% Touch [S.Rtrv] repeatedly to select the
desired setting.
Each touch of [
S.Rtrv] changes the settings as
follows:
!
:
Sound Retriever function (level 1) is acti-
vated.
!
:
Sound Retriever function (level 2) is acti-
vated.
! No indicator:
Sets to off.
p S.Rtrv2 has a stronger effect than S.Rtrv1
and is more effective when playing back
highly compressed audio data.
Engb
88
Chapter
17 Playing audio CDs