Pioneer KRF-9000FD - Manual (Page 30)

4
30
Setting Menu (Continued)
Settings
z
Changing the lamp power will not change the lamp time (lamp life).
z The setting cannot be changed within approximately 90 seconds after this unit has been turned on.
z Settings cannot be changed within approximately 60 seconds after they are made.
z This can also be displayed from the remote control. (p P10)
Install2 > Startup Logo
g Startup Logo
Sets whether to display “Startup Logo” during startup.
Off Do not display.
On Displays for 5 seconds.
Install2 > Lamp Power
h Lamp Power
Configures the output of the light-source lamp.
Normal For normal circumstances, select this setting. (170 W)
High Select this when it is difficult to see the image in a bright room. (200 W)
Install2 > Test Pattern
i Test Pattern
Displays 6 types of test patterns. For adjusting the image size (zoom) and the focus. (p P18)
Install2 > Language
j Language
Sets the language of the menu display.
日本語 Japanese
English English
Deutsch German
Français French
Español Spanish
Português Portuguese
Italiano Italian
Nederlands Dutch
Svenska Swedish
Norsk Norwegian
中文 Chinese (Simplified)
KRF-9000FDE_EN.book Page 30 Tuesday, February 19, 2008 9:16 AM