Pioneer CNDV-50MT - Manual (Page 125)

123
A
ppe
n
d
ix
NA
V
I/A
V
Data Read error. Back to Original
Background.
Please do not turn power off.
Failed to read the data because the
CD-R is damaged or dirty. Or, the
pick-up lens of the DVD drive is dirty.
Try re-reading the data by inserting a
clean CD-R.
Clean the pick-up lens with a
commercially available cleaning kit
for DVD, then try to reading again.
There are no files available in /BG/
folder.
If the BG folder exists on the PC card
but no data in JPEG format exists.
If the BG folder exists on the CD-R
but no data in JPEG format exists.
Use the appropriate data after
reading “Changing Background
Picture” on page 49.
Please insert the appropriate disc.
Route calculation was not possible.
In the memory navi mode, if the
Auto-reroute does not function for
some reason.
Insert the map disc.
• Scaling down.
• Scaling up.
In the memory navi mode, if the map
disc is inserted without changing the
scale (only when the point is stored
on the map disc).
The scale automatically returns to
the one that was set in the DVD navi
mode before being changed to the
memory navi mode.
• No map data available on this
scale. Scaling up.
• No map data available on this
scale. Scaling down.
When the scale that had been
previously displayed cannot be
displayed for the following reasons:
• The disc was ejected and the
system was changed to the memory
navi mode.
• In the memory navi mode, the map
was scrolled to outside the memory
area. Or the vehicle moved outside of
the memory area.
If the desired scale cannot be
selected, insert the map disc and
then change the scale.
Failure in the memory recovery
process. Memory navigation is
presently not possible.
Failed to complete the recovery of the
memory area because the disc could
not be read for some reason,
resulting in deletion of the memory.
• Clean the disc.
• Clean the DVD drive.
• Consult the Pioneer Local dealer if
this message persists.
The map data could not be stored.
Previous setting will be kept.
In case recovery was performed for
the memory area after failing to read
the disc data for some reason (The
memory area that was previously set
will be recovered).
• Clean the disc.
• Clean the DVD drive.
• Consult the Pioneer Local dealer if
this message persists.
Failed to save to memory. Please re-
enter setting.
In case the settings could not be
saved for some reason.
• Retry.
• Consult the Pioneer Local dealer if
this message persists.
Message When What to do
MAN-CNDV-50MT-EN.book Page 123 Wednesday, May 4, 2005 1:49 PM