Pioneer CNDV-50MT - Manual (Page 75)

73
Ch
ap
te
r
6
Usin
g t
h
e AV S
o
u
rc
e (
B
u
ilt
-in
D
V
D
dr
ive
an
d R
adio
)
AV
2
Press TA/NEWS button to turn traffic
announcement standby on.
appears in the display. The tuner
will standby for traffic announcements.
If you turned TA function on while tuned in to
neither a TP nor an enhanced other network’s
TP station, the
indicator lights.
To turn traffic announcements standby off,
press TA/NEWS button again.
3
Use VOLUME to adjust the TA volume
when a traffic announcement begins.
The newly set volume is stored in memory and
recalled for subsequent traffic
announcements.
4
Press TA/NEWS button while a traffic
announcement is being received to cancel
the announcement.
The tuner returns to the original source but
remains in the standby mode until TA/NEWS
button is pressed again.
You can also cancel the announcement by
pressing SRC or BAND button or by moving
the joystick while a traffic announcement is
being received.
❒
When the preset list is displayed, the TA
function icon will not be displayed.
➲ Switching screen display ➞ Page 98
❒ You can also turn on or off TA function in
the FUNCTION menu. Touching “TA”
switches between “ON” and “OFF”.
❒ The system switches back to the original
source following traffic announcement
reception.
❒ Only TP and enhanced other network’s TP
stations are tuned in during seek tuning or
BSM when TA is on.
Using PTY functions
You can tune in a station by using PTY
information.
Searching for an RDS station by PTY
information
You can search for general types of broadcasting
programs.
➲ PTY list ➞ Page 75
1
Touch “PTY” in the FUNCTION menu.
2
Touch 4 or 6 to select a program type.
There are four program types:
NEWS&INF – POPULAR – CLASSIC –
OTHERS
3
Touch “START” to begin the search.
The tuner searches for a station broadcasting
that program type.
To cancel the search, touch “STOP”.
❒
The program of some stations may differ
from that indicated by the transmitted PTY.
❒ If no station is broadcasting the type of
program you searched for, NOT FOUND
is displayed for about two seconds and
then the tuner returns to the original
station.
Using news program interruption
When a news program is broadcast from a PTY
code news station, the navigation unit can switch
from any station to the news broadcast station.
When the news program ends, reception of the
previous program resumes.
1
Press TA/NEWS button and hold to turn
on news program interruption.
Press TA/NEWS button until
or
appears in the display.
To turn off news program interruption, press
TA/NEWS button and hold again.
A news program can be cancelled by pressing
TA/NEWS button.
You can also cancel the news program by
pressing SRC or BAND button or by moving
the joystick while a news program is being
received.
❒
When the preset list is displayed, the
NEWS function icon will not be displayed.
RD
S
MAN-CNDV-50MT-EN.book Page 73 Wednesday, May 4, 2005 1:49 PM