Switching the hdmi audio setting, Resetting the hdmi connection, About hdmi – Pioneer DCS-370 User Manual

Page 34: Other connections 09

Advertising
background image

Other connections

09

34

En

Use an HDMI cable to connect the HDMI

OUT interconnect on this player to an HDMI
interconnect on a HDMI-compatible monitor.

• The arrow on the cable connector body

should be face up for correct alignment
with the connector on the player.

You can also adjust the HDMI settings for
resolution and color. For more on these
settings see Video Output settings on page 27.

Switching the HDMI audio setting

To listen to audio from the HDMI interconnect,
make sure you’ve specified the HDMI audio
output setting.

1

Switch the system into standby.

2

Press SETUP and use

/ to choose

HDMI OUT then press ENTER.

3

Use

/ to choose the setting you want

then press ENTER.

AUDIO ON – Audio signals are output
through the HDMI interconnect

AUDIO OFF – Switches off HDMI audio

Resetting the HDMI connection

If you get an error message (the display shows
HDMI ERR) or if the screen goes blank (for
example, after changing the resolution), check
the troubleshooting guide on page 44. If this
doesn’t solve the problem, follow the steps
below to reset the HDMI connection.

1

Switch the system into standby.

2

Press SETUP and use

/ to choose

HDMI INI then press ENTER.
The system will restart and the HDMI settings
are automatically reset to the factory defaults.
See Video Output settings on page 27 for more
on these settings.

About HDMI

HDMI (High Definition Multimedia Interface)
supports both video and audio on a single
digital connection for use with DVD players,
DTV, set-top boxes, and other AV devices.
HDMI was developed to provide the
technologies of High Bandwidth Digital
Content Protection (HDCP) as well as Digital
Visual Interface (DVI) in one specification.
HDCP is used to protect digital content
transmitted and received by DVI-compliant
displays.

HDMI has the capability to support standard,
enhanced, or high-definition video plus
standard to multichannel surround-sound
audio. HDMI features include uncompressed
digital video, a bandwidth of up to 2.2 gigabytes
per second (with HDTV signals), one connector
(instead of several cables and connectors), and
communication between the AV source and
AV devices such as DTVs.

HDMI, the HDMI logo and High-Definition
Multimedia Interface are trademarks or
registered trademarks of HDMI licensing LLC.

SURROUND

SUB

WOOFER

FRONT

CENTER

SPEAKERS (4

Ω - 6 Ω)

AUDIO

R

L

R

R

L

L

R

L

AV CONNECTOR

VIDEO OUT

ANTENNA

OUT

LINE
OUT

LINE 2
IN

LINE 1

FM

UNBAL 75

Ω

AM LOOP

CONTROL

HDMI OUT

HDMI-compatible display

To HDMI

input

Other connections.fm 34 ページ 2007年1月17日 水曜日 午前11時43分

Advertising
This manual is related to the following products: