Pioneer AVIC-F840BT - Manual (Page 19)

3 Press the middle of the SD memory
card gently until it clicks.
4 Pull the SD memory card out straight.
When the data related to map data is
stored
p This description is for AVIC-F940BT and
AVIC-F840BT.
If data related to map data, such as custo-
mised POI data, is stored on the SD memory
card, operating procedures are slightly differ-
ent.
1 Press the h button and then touch
[Eject SD].
2 Touch [Yes].
The navigation system restarts, and a message
prompting you to remove the SD memory card
appears.
3 Eject the SD memory card while the
message is displayed.
Eject the SD memory card before touching
[
OK].
4 Touch [OK].
The navigation system restarts.
Plugging and unplugging a
USB storage device
CAUTION
! To prevent data loss and damage to the sto-
rage device, never remove it from this naviga-
tion system while data is being transferred.
! Pioneer cannot guarantee compatibility with
all USB mass storage devices and assumes
no responsibility for any loss of data on media
players, smart phones, or other devices while
using this product.
p This navigation system may not achieve op-
timum performance with some USB sto-
rage devices.
p Connection via a USB hub is not possible.
Engb
19
Chapter
02
Basic
operation
Basic operation