Pioneer AVIC-F550BT - Manual (Page 48)

48
After the location is decided
If you cannot find a good alternative, touch
[More Results] and scroll down for routes
with different routing methods.
6. Select one of the alternatives and touch
[Back].
The previous screen returns. The navigation
system calculates the route. The orange line
now shows the new recommended route.
Setting a route using the “My Route”
menu
1. Touch [Menu] on the map screen.
The “Navigation Menu” screen appears.
➲
For details of the operations, refer to
“Screen switching overview” on page 27.
2. Touch [My Route] on the “Navigation
Menu” screen.
3. Touch [Create Route].
❒ The start point of the route, normally it is the
current GPS position, is displayed.
4. Touch .
❒ When the “Create Route” option is not
displayed, touch [More] to open a list with
more options.
5. Select the destination you want to set.
You can select the destination of the route the
same way as described in the previous
sections.
➲
For details, refer to “Selecting a location
you searched for recently” on page 45.
When the new destination is selected, the list
returns.
❒ To add more destinations, touch where
you want to insert the new point in the list,
and repeat the above steps.
6. Touch [Go] to confirm the destination.
After a short summary of the route
parameters, the map appears showing the
entire route. The route is automatically
calculated.
❒
If you have already set the route to the
destination, [Next] will appears. Touch
[Next] and select the way to modify the
current route.
➲ For details, refer to “Selecting a new
destination when a route is already set” on
page 53.
13-MAN-AVICF550-EN.fm Page 48 Monday, April 8, 2013 3:02 PM