Pioneer SPH-DA110 - Manual (Page 31)

07
Registering and connecting a Bluetooth device
Chapter
31
Engb
R
egistering and connecting a Bluetooth device
Pairing from your Bluetooth devic-
es
You can register a Bluetooth device by setting
this product to standby mode and requesting
connection from the Bluetooth device.
p Before registration, make sure that
“Visibility” in the “Bluetooth Connec-
tion Menu” is set to “On”.
Ü
For details, refer to Switching product
visibility on page 34 .
1 Activate the Bluetooth wireless tech-
nology on your devices.
For some Bluetooth devices, no specific
action is necessary to activate Bluetooth
wireless technology. For details, refer to the
instruction manual of your devices.
2 Use the Bluetooth setting in the device
to pair this product with device.
p The device name is “AppRadio SPH-
DA110”.
p If a PIN code input is required, enter a PIN
code. (The default PIN code is “0000”.)
When the device is successfully registered,
the connection settings are made from the
device.
p If registration fails, repeat the procedure
from the beginning.
Deleting a registered device
When you have already registered three
Bluetooth devices and you want to add
another one, you must first delete one of the
registered devices.
p If a registered phone is deleted, all the
phone book entries and call history lists
that correspond to the phone will be also
cleared.
1 Tap on the Home screen.
Ü For details, refer to Home screen on page
12.
The phone menu screen appears.
2 Tap on the phone menu.
The “Bluetooth Connection Menu” screen
appears.
3 Tap [Connection] on the “Bluetooth
Connection Menu”.
The registered device list screen appears.