Pioneer SPH-DA110 - Manual (Page 56)

Customising preferences
10
Chapter
56
Engb
Checking the connections of leads
Check that leads are properly connected be-
tween this product and the vehicle. Please al-
so check whether they are connected in the
correct positions.
1 Display the “System” screen.
Ü For details, refer to Customising the
system settings on page 48.
2 Tap [Connection Status].
The “Connection Status” screen appears.

2
3
 GPS Antenna
Indicates the connection status of the GPS
aerial, the reception sensitivity, and from
how many satellites the signal is received.
Colour Signal
communica-
tion
Used in
positioning
Orange Yes Yes
Yellow Yes No
p When the GPS aerial is connected to
this product, “OK” is displayed.
When the GPS aerial is not connected to
this product, “Not OK” is displayed.
p If reception is poor, please change the
installation position of the GPS aerial.
2 Positioning Status
Indicates the current GPS positioning sta-
tus.
• 2D Positioning:
The status when the signals from three
satellites are received.
• 3D Positioning:
The status when the signals from four or
more satellites are received.
3 Back Signal
When the gearstick is shifted to “R”, the
signal switches to “High” or “Low”. (One
of these is displayed depending on the ve-
hicle.)
Switching the App launch assist
function (for iPhone)
You can set whether to launch the AppRadio
app automatically when you tap [Apps] icon
on the Home screen.
1 Display the “System” screen.
Ü For details, refer to Customising the
system settings on page 48.
2 Tap [App launch assist].
Tapping [
App launch assist] changes the set-
tings as follows:
• On (default) :
Activates the App launch assist function.
• Off
:
Deactivates the App launch assist func-
tion.
Displaying the firmware version
If this product fails to operate properly, you
may need to consult your dealer for repair. In
such cases, you may be asked to specify the
system version. Perform the following proce-
dure to check the firmware version of this
product.
1 Display the “System” screen.
Ü For details, refer to Customising the
system settings on page 48.
2 Tap [Firmware Version Information] to
display to the firmware version of this
product.