Controlling the rest of your system, 1 press setup and hold for three seconds – Pioneer VSX-D710S User Manual

Page 38

Advertising
background image

38

En

5 Point the two remote controls towards each

other. Press the button to be learned on this
receiver’s remote control (for example the

3

[play] button).

Point the remote controls directly at each other, about
1-2 inches apart, and press the button on the remote
control for the operation you want to program. The
LED flashes rapidly. For VSX-D850S, the LEARN icon
blinking.

6 Press the corresponding button on the other

remote control to be taught to this receiver’s
remote control (in the above example the

3

[play] button).

Point the remote controls toward each other.
Press the button on the other remote control
corresponding to the operation you wish to program.
The LED on this receiver’s remote will go out and
then resume a steady light if the operation is learned.
(For VSX-D850S model the LEARN icon will light
steadily and the LCD display will show “OK” if the
operation has been learned.) If the operation hasn’t
been learned for some reason the LED will blink for
three seconds and then light steadily. (For VSX-
D850S model the LCD will display “error” if the
operation hasn’t been learned.)
If this happens press the teaching key repeatedly,
varying the distances between the remotes, until you
see the LED on this unit’s remote light steadily,
without blinking first.

To program additional operations for the current
component
Repeat steps 5 and 6.
To program operations for another component
Repeat steps 2 through 6 (VSX-D850S).
Repeat steps 3 through 6 (VSX-D710S/D810S).

7 Press and hold SETUP for one second to exit

the LEARNING setup mode.

After thirty seconds of inactivity the remote control
will automatically leave the LEARNING mode and
revert to its previous mode.

MEMO:
• Some commands from other remote controls cannot

be learned, but in most cases the remotes just need to
be moved closer together or farther apart.

• Certain buttons represent modes that cannot be

learned from other remote controls. These include:
RCV, CH SELECT, CH LEVEL, FUNCTION
LOUDNESS, FL DIMMER, and MUTING.

• TV CONTROL buttons ( TV , VOL +/-, and TV

FUNC ) can only be learned in TV & TVC mode.

Controlling the Rest of Your System

Learning Mode: Programming
Signals from other Remote
Controls

If preset codes are not available for your component(s),
or the available preset codes do not operate correctly,
you can use this function to program in signals from the
remote control(s) of your other component(s). This
operation can also be used after recalling a preset code
to program additional operations not covered in the
preset codes.

1 Press SETUP and hold for three seconds.

The LED on the remote control will light for two
seconds.
To cancel the Learning mode at any time
Press

SETUP

.

The remote control will also return to the previous
mode after thirty seconds of inactivity.

2 VSX-D850S only: Use the

@ # buttons to

select the Learning mode.

The Learning mode is indicated by the Learning icon
(LEARN) in the remote’s LCD display.

3 Press the MULTI CONTROL button for the

component you want to control

4 VSX-D710S/D810S: Press and hold the

RECEIVER button for two seconds to start
the Learning mode.

The LED lights steadily.
To cancel LEARNING setup mode
Press

SETUP

for one second.

If no commands are entered within thirty seconds the
remote will revert to its previous mode.

TV

TVFUNC

MENU

VOLUME

MASTER VOLUME

TV CONTROL

AV PRE-PROGRAMMED AND LEARNING

REMOTE CONTROL UNIT

CHANNEL

ENTER

ENTER

DISC

DTV INFO

MPX/RETURN

DTV ON/OFF

DTV MENU

D.ACCESS

GUIDE

ST

TUNE

TUNE

ST

CLASS

ATT

BAND

/DTS

DSP

TEST TONE

CH SELECT

CH LEVEL

FUNCTION

SIGNAL SELECT

1

¡

4

¢

7

8

3

EFFECT

DVD

VCR

CD-R

TV

RCV

TUN

TVC

CD

MIDNIGHT

LOUDNESS

MUTING

SETUP

FL DIMMER

MULTI CONTROL

5.1 / 7.1

RECEIVER

SOURCE

1

2

3

4

5

6

7

8

9

0

10

2

3

LED

2

4

1,7

VSX-D710S/
D810S only

VSX-D850S only

1 - 2 inches

TV

TVFUNC

MENU

VOLUME

MASTER VOLUME

TV CONTROL

AV PRE-PROGRAMMED AND LEARNING

REMOTE CONTROL UNIT

CHANNEL

ENTER

ENTER

DISC

DTV INFO

MPX/RETURN

DTV ON/OFF

DTV MENU

D.ACCESS

G

UIDE

ST

TUNE

TUNE

ST

CLASS

AT

T

BAND

/DTS

DSP

TEST T

O

NE

CH SELECT

CH LEVEL

F

UNCTION

SIGNAL

SELECT

4

¢

7

8

3

EFFECT

DVD

V

CR

CD-R

TV

RCV

TUN

TVC

CD

MIDNIGHT

LOUDNESS

MUTING

SETUP

FL

DIMMER

MUL

T

I CONTROL

5.1 / 7.1

RECEIVER

SOURCE

1

2

3

4

56

7

8

9

0

10

2

Advertising
This manual is related to the following products: