Pioneer DDJ-SX - Manual (Page 13)

13 En
English 2 Press the [f] button to play the track.
3 Move the channel fader away from you.
4 Turn the [TRIM] control.
Adjust [TRIM] so that the orange indicator on the channel level indicator
lights at the peak level.
5 Turn the [MASTER LEVEL] control to adjust the audio
level of the speakers.
Adjust the sound level output from the [MASTER OUT 1] and [MASTER
OUT 2] terminals to an appropriate level.
Monitoring sound with headphones
Set the positions of the controls, etc., as shown below.
Names of controls, etc. Position
HEADPHONES MIXING control Center
HEADPHONES LEVEL control Turned fully counterclockwise
1 Press the headphones [CUE] button for the channel 1.
2 Turn the [HEADPHONES LEVEL] control.
Adjust the sound level output from the headphones to an appropriate
level.
Note
This unit and the Serato DJ software include a variety of functions
enabling individualistic DJ performances. For details on the respective
functions, see the operating instructions and the Serato DJ software
manual.
! This unit’s operating instructions can be downloaded from the
Pioneer DJ support site. For details, see Downloading this unit’s oper-
ating instructions (p. 15).
! The Serato DJ software manual can be downloaded from “Serato.
com”. For details, see Downloading the Serato DJ software manual (p.
15).
Quitting the system
1 Quit [Serato DJ].
When the software is closed, a message for confirming that you want to
close it appears on the computer’s screen. Click [Yes] to close.
2 Press the [STANDBY/ON] switch on this unit’s rear
panel to turn this unit’s power off.
3 Disconnect the USB cable from your computer.
Names of Parts
1 Browser section
2 Deck section
3 Mixer section
4 Effect section
Browser section
1 1 2 1 1
3 4
1 LOAD button
2 Rotary selector
3 BACK button
4 LOAD PREPARE button