Pioneer MEH-P7100R - Manual (Page 4)

3
Connecting the Units
Note:
Depending on the kind of vehicle, the function
of 3* and 5* may be different. In this case, be
sure to connect 2* to 5* and 4* to 3*.
4* 5*
3*
1*
2* This product
Antenna jack
Connect leads of the same
color to each other.
Cap (1*)
When not using this terminal,
do not remove the cap.
Yellow (3*)
Back-up
(or accessory) Yellow (2*)
To terminal always supplied
with power regardless of
ignition switch position.
Red (5*)
Accessory
(or back-up) Red (4*)
To electric terminal controlled by
ignition switch (12 V DC)
ON/OFF.
Black (ground)
To vehicle (metal) body.
ISO connector
Note:
In some vehicles, the ISO connector may
be divided into two. In this case, be sure to
connect to both connectors.
Speaker leads
White
: Front left +
White/black : Front left ≠
Gray : Front right +
Gray/black : Front right ≠
Green : Rear left + or Not used
Green/black : Rear left ≠ or Not used
Violet : Rear right + or Subwoofer +
Violet/black : Rear right ≠ or Subwoofer ≠
IP-Bus input (Blue)
Multi-CD player
(sold separately)
Subwoofer
output or Non
Fading Output
IP-BUS cable
Orange
To lightnig switch terminal.
Refer to a Handsfree
Telephone unit’s manual
(sold separately).
Fuse holder
Fuse resistor
Fuse resistor