Pioneer MEH-P7100R - Manual (Page 5)

+
≠
+
≠
+
≠
+
≠
4
ENGLISH
ESPAÑOL
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
The pin position of the ISO connector will differ
depends on the type of vehicle. Connect 6* and 7*
when Pin 5 is an antenna control type. In another
type of vehicle, never connect 6* and 7*.
Yellow/black
If you use a cellular telephone, connect it via the Audio Mute lead on the cel-
lular telephone. If not, keep the Audio Mute lead free of any connections.
Blue/white (6*)
To Auto-antenna relay con-
trol terminal (max. 300 mA
12 V DC).
System remote control
Blue/white
To system control terminal of the power
amp (max. 300 mA 12 V DC).
Connecting cords
with RCA pin plugs
(sold separately)
Power amp
(sold separately)
Power amp
(sold separately)
Blue/white (7*)
Front speaker
Subwoofer
Left
Front speaker
Subwoofer
Right
Use this for connections
when you have the sepa-
rately available amplifier.
Note:
When a subwoofer is connected to this unit instead of a rear
right speaker, do not connect the rear left speaker lead to any-
thing. For details, refer to the Initial Setting Menu in the
Operation Manual.
Front output
Fig. 2