Pioneer DEX-P99RS - Manual (Page 4)


<CRD4427-B> <4>
Power cable connection diagram
Yellow/black (MUTE)
If you use an equipment with Mute function, wire this lead
to the Audio Mute lead on that equipment.
If not, keep the Audio Mute lead free of any connections.
Yellow/black (DOOR MUTE)
Connect to the lead which detects door opening.
Usually, connect to the dome light control lead.
Antenna jack
High/Mid/Low/Subwoofer output
20 cm 1.5 m
15 cm
Yellow (+ Battery)
Connect to the constant 12 V supply
terminal.
Red (ACC)
Connect to terminal controlled by
ignition switch (12 V DC).
Orange/white (ILL)
Connect to lighting switch terminal.
Black (chassis ground)
Connect to a clean, paint-free metal location.
Fuse (7.5A)
Fuse resistor
Fuse resistor
Fuse resistor
Blue/white (SYSTEM REMOTE CONTROL)
Connect to system control terminal of the
power amp or auto-antenna relay control
terminal (max. 300 mA 12 V DC).
IP-BUS input (Blue)
This product
Wired remote input
Hard-wired remote control adaptor
can be connected (sold separately).
USB cable
Connect to separately sold USB device.
USB input jack
Connection method
2. Clamp firmly with
needle-nosed pliers.
1. Clamp the lead.
Note:
• The position of the parking brake switch depends on the vehicle model. For details,
consult the vehicle Owner’s Manual or dealer.
The dome light
control lead
Connecting the units