B.2 dust filter on the back side – Barco R5976562 User Manual
Page 132
Advertising
![background image](/manuals/48658/132/background.png)
B. Cleaning the dust filters
B.2 Dust filter on the back side
Necessary tools
•
Flat screwdriver
•
Philips screwdriver
What should be done
To get access to the dust filters, the back cover must be removed.
How to remove
1. Loosen the 3 screw on the back side. (image B-6)
2. Take off the cover.
3. Turn out 2 times 4 screws to remove both dust filters on the back side of the cover. (image B-7)
4. Take out the dust filters.
5. Turn out the 4 screw on the bottom side and take out the dust filter. (image B-8)
Image B-6
Back cover removal
128
R5976562 BARCOSLM G10 PERFORMER 20/10/2004
Advertising
This manual is related to the following products: