Barco R5976562 User Manual
Page 22
Advertising
3. Installation Guidelines
Necessary tools
Flatblade screwdriver of 5mm or Nut driver 8mm
Installing the lamp unit
1. Remove the lock nut on the 3 spacer screws (A). (image 3-9)
2. Line up the lamp unit guides with the guides on the projector frame (B) and push the unit into the frame until it fits. (image 3-10)
3. Secure the position of the lamp unit with the 3 spacer screws. (image 3-11)
Image 3-9
Lamp unit, removing the lock nuts
18
R5976562 BARCOSLM G10 PERFORMER 20/10/2004
Advertising
This manual is related to the following products: