Toshiba JournE Scan - Manual (Page 8)

8 User’s Manual
EN
Using the Scanner
Preparation
1. Peel off the tape that secures the guide lever.
NOTE: This step is only required when you use the
scanner for the first time.
2. Connect the plug on the power adapter cable to the power
socket on the scanner. Plug the power adapter into a power
outlet.
3. Insert an unlocked (writable) memory card into a suitable
memory card slot.
• If both slots are occupied, the scanner will take the following priority when
storing the scanned images: SD (MMC) > CF > xD > MS
4. Press the Power button. The Power indicator blinks. Wait
until the Power indicator stops blinking and then goes off.
The Status/card indicator will light up instead, indicating that
the scanner is ready.
UM_EEMEA_Scan_1108.book Page 8 Monday, December 15, 2008 2:26 PM