Belkin SURF N 15 N150 - Manual (Page 19)

19
TROUblEshOOTing, sUppORT, anD WaRRanTY
belkin setup completed installation, but i cannot browse the
Web . The light on the front of my Router is solid amber .
1 . use the troubleshooting suggestions within Belkin setup .
2 . if your isP requires a user name and password, make sure that
you have typed in your user name and password correctly . some
user names require that the isP’s domain may be at the end of the
name . example: “myname@myisp .com” . the “@myisp .com” part of
the user name may need to be typed as well as your user name .
3 . if you have a static connection, your isP will have
assigned you an iP address, subnet mask, and gateway
address . Please re-run Belkin setup and enter this
information when a static connection is mentioned .
4 . You may need to configure your router to meet
the specific requirements of your isP . to search
our knowledge base for isP-specific issues, go to:
http://www .belkin .com/support and type in “isP” .
5 . if you continue to have no internet connection, refer
to “Manually configuring network settings” in this
manual for an alternative setup method .
i can’t connect to the internet wirelessly .
if the light on the front of the router is solid green, then your
router is connected to the internet . You may not be connected
to the router’s wireless network . Please refer to “adding
computers to Your network” in this manual for instructions .