Toshiba Satellite Pro A120 (PSAC0) - Manual (Page 41)

User’s Manual 2-9
The Grand Tour
Display hinge The display hinge holds the LCD display panel at
easy-to-view angles.
LCD screen The LCD screen displays high-contrast text and
graphics. You can change the resolution between
800 x 600 and 1,280 x 800 pixels. Refer to
Display Controller and Modes section in
Appendix B.
When the computer operates on the AC adaptor
the LCD screen’s image will be somewhat
brighter than when it operates on battery power.
The lower brightness level is intended to save
battery power.
Stereo speakers The speakers emit sound generated by your
software as well as audio alarms, such as low
battery condition, generated by the system.
Touch Pad control
buttons
Control buttons below the Touch Pad let you
select menu items or manipulate text and
graphics designated by the on-screen pointer.
Touch Pad A Touch Pad located in the center of the palm
rest is used to control the on-screen pointer.
Refer to the Using the Touch Pad section in
Chapter 4, Operating Basics .
TOSHIBA
Presentation button
Press this button to display the same image on
both internal and external monitors or to use
multi-monitor display (Windows XP Only).
The default setting is “Presentation (Same Image
1,024 × 768)”. The same image is displayed on
the internal and external monitor with screen
resolution 1,024 × 768.
In the setting of “Presentation (Different Image)”,
you can use the internal and external monitors as
a widescreen.
This setting is supported in Windows XP only.
Pressing the button again can be changed single
display mode on an internal monitor only.
You can specify the function of TOSHIBA
Presentation button in the TOSHIBA Controls
properties.
Depending on the model, TOSHIBA Presentation
button is not present.