Writing cds on dvd-rom&cd-r/rw drive, Writing cds on dvd-rom&cd-r/rw drive -6, Writing cds on – Toshiba Satellite Pro A120 (PSAC0) User Manual

Page 64: Dvd-rom&cd-r/rw drive

Advertising
background image

4-6

User’s Manual

Operating Basics

3. Push the center of the disc tray to close it. Press gently until it locks into

place.

How to remove CD/DVD when the disc tray will not open

Pressing the eject button will not open the disc tray when the computer

power is off. If the power is off, you can open the disc tray by inserting a

slender object (about 15 mm) such as a straightened paper clip into the

eject hole just to the right of the eject button.

Figure 4-9 Manual release with the eject hole

Writing CDs on DVD-ROM&CD-R/RW drive

Depending on the type of drive installed, you may be able to write CDs. The

DVD-ROM&CD-R/RW drive lets you write as well as read CD-ROMs.

Observe the precautions in this section to ensure the best performance for

writing CDs. For information on loading and unloading CDs refer to the

Using optical disk drives

section.

Eject hole

15mm

Turn off the power before you use the eject hole. If the CD/DVD is spinning

when you open the disc tray, the CD/DVD could fly off the spindle and

cause injury.

Refer to the

Writable discs

, Chapter 2 for details about the types of

writable CD/DVD discs.

When writing to media using an optical drive, always connect the AC

adaptor to a power plug socket or power source to ensure maximum

performance. If data is written powered by the batteries, writing may

sometimes fail due to low battery power and data loss may occur.

Advertising
This manual is related to the following products: