Toshiba Satellite Pro A120 (PSAC0) - Manual (Page 112)

6-12 User’s Manual
Power and Power-Up Modes
TOSHIBA Password Utility
The TOSHIBA Password Utility provides two levels of password security:
User and Supervisor.
User Password
To start the utility, point to or click the following items:
start -> All Programs -> TOSHIBA -> Utilities -> Password Utility
The User Password dialog box contains two main fields: User Password
and User Token.
User authentication may be required to validate user rights when using
“TOSHIBA Password Utility” to delete or change passwords, or create
tokens, etc.
User Password field
■ Set (button)
Click this button to register a password of up to 50 characters. After a
password is set, you will be prompted to enter it when you start the
computer.
Check “Set the same string simultaneously as HDD User Password”
when setting the HDD User Password.
■ Delete (button)
Click this button to delete a registered password. Before you can delete
a password, you must first enter the current password correctly or insert
a proper token.
Please use BIOS Setup to change or delete the HDD (Hard Disk Drive)
Passwords or to set the HDD Master Password.
Passwords set in TOSHIBA Password Utility are different from the
Windows password.
■ Depending on models, the HDD (Hard Disk Drive) password is not
supported.
■ After you set the password, a dialog box will be displayed asking
whether you want to save it to a floppy disk or other media. If you forget
the password, you can open the password file on another computer. Be
sure to keep the media in a safe place.
■ When entering the character string to register the password, enter from
the keyboard character by character and do not enter as ASCII code or
copy-and-paste the character string. In addition, ensure that the
registered password is correct by outputting the character string to the
password file.
■ When entering a password, do not enter any characters (for example
“!” or “#”) produced by pressing the Shift or Alt keys and so on.