Toshiba WT8-B - Manual (Page 24)

When you connect the AC adaptor to the tablet, always follow the
steps in the exact order as described in this User’s Manual.
Connecting the power cable to a live electrical outlet should be the last
step otherwise the adaptor DC output plug could hold an electrical
charge and cause an electrical shock or minor bodily injury when
touched. As a general safety precaution, avoid touching any metal
parts.
Never place your tablet or AC adaptor on a wooden surface, furniture,
or any other surface that could be marred by exposure to heat since
the tablet base and AC adaptor's surface increase in temperature
during normal use.
Always place your tablet or AC adaptor on a flat and hard surface that
is resistant to heat damage.
Refer to the enclosed Instruction Manual for Safety and Comfort for
detailed precautions and handling instructions.
1. Plug the USB connector of the Micro-USB cable into the AC adaptor.
Figure 2-1 Plugging the Micro-USB cable into the AC adaptor
2-pin
3-pin
Either a 2-pin or 3-pin adaptor will be included with the tablet depending on
the model.
User's Manual 2-4