Toshiba WT8-B - Manual (Page 50)

USB device
This tablet is equipped with a Micro-USB port that complies with USB 2.0
standard.
You can connect the USB device into the Micro-USB port on your tablet
directly or through the USB port on the provided "USB Data and Charge Y-
Cable" depending on the USB device.
Make sure the connector is properly aligned with the socket. Do not try to
force the connection, doing so can damage the connecting pins.
As the port operation of all USB devices has not been confirmed, some
USB devices may not function properly.
Using the "USB Data and Charge Y-Cable"
The "USB Data and Charge Y-Cable" is provided with some models and it
can be used for the following scenarios:
Charging only
Charging the tablet as a charging cable connected with the AC
adaptor.
Charging and Data transfer
Charging the tablet as a charging cable connected with the AC
adaptor and connecting to a standard USB device at the same time.
Figure 4-4 USB Data and Charge Y-Cable (TOSHIBA WT10-A for example)
1
2
3
1. USB Data and Charge Y-Cable 3. Universal Serial Bus (USB 2.0) port
2. Micro-USB port (Charge only)
Data transfer only
Connecting to a standard USB device only.
Charging the tablet via connecting the "USB Data and Charge Y-
Cable" may take longer.
User's Manual 4-10