Toshiba WT8-B - Manual (Page 57)

2. Plug the the smaller connector of the Micro-USB cable into the Micro-
USB port on your Keyboard.
Figure 4-10 Charging the Keyboard
2-pin
3-pin
Product appearance depends on the model you purchased.
3. Plug the AC adaptor into a live wall outlet.
A full charge takes about 3 hours.
If you are not going to use the Keyboard for a long period of time, turn it off
to conserve power.
Connecting your tablet to the Keyboard
Before you start using the Keyboard, it is neccessary to do Bluetooth
pairing.This is required for the first time and after that, the system will
remember this keyboard until manually unpaired.
You may follow the steps as detailed below to do the pairing:
1.
On the Keyboard, slide the Power switch to the Bluetooth position for
one second and release, the Bluetooth indicator starts blinking white
for pairing.
2. On your tablet, swipe in from the right edge of your screen on the
desktop to open charms, and then tap Settings -> Change PC
settings -> PC and devices -> Bluetooth.
The Bluetooth function on your tablet is enabled by default. Your tablet
will just start scanning available Bluetooth devices, and you will see a
list of available Bluetooth devices for connection.
3. Tap the device named Bluetooth Keyboard, a Bluetooth pairing
request window will pop up. Follow the on-screen instructions to
complete pairing. You will see Bluetooth Keyboard as connected
after the pairing has been successfully completed.
Now the Keyboard is ready for use.
If you want to pair more than one Keyboard with your tablet, it is
recommended to do pairing one by one.
One Keyboard only supports one tablet in Bluetooth connecting.
User's Manual 4-17