Toshiba Tecra A5 - Manual (Page 151)

TOSHIBA A5 9-12
Troubleshooting
Sound system
Pointing device
If you are using a USB mouse, also refer to the USB section in this chapter
and to your mouse documentation.
Touch Pad
Problem Procedure
No sound is heard Adjust the volume control dial.
Check the software volume settings.
If appropriate, make sure the headphone
connection is secure. Check Windows Device
Manager and ensure the sound function is
enabled and that settings for I/O address,
interrupt level and DMA are correct for your
software and do not conflict with other hardware
devices that you have connected to the computer.
If problems persist, contact your dealer.
Problem Procedure
On-screen pointer does
not respond to Pad
operation The system might be busy. If the pointer is shaped
as an hourglass, wait for it to resume its normal
shape and try again to move it. You may also press
Fn + F9 to enable the Touch Pad and then try
again to move it.
Double-tapping does
not work Try changing the double-click speed setting in the
mouse control utility.
1. Open the Control Panel, select the Mouse
icon and press Enter.
2. Click the Buttons tab.
3. Set the double-click speed as instructed and
click OK.
The mouse pointer
moves too fast or too
slow Try changing the speed setting in the mouse
control utility.
1. Open the Control Panel, select the Mouse
icon and press Enter.
2. Click the Pointer Options tab.
3. Set the speed as instructed and click OK.
If problems persist, contact your dealer.