Toshiba DVR18 - Manual (Page 29)

29 EN
In
trod
uct
ion
Co
nn
ect
io
n
s
Basic Setup
Pl
ayback
Ed
iti
n
g
V
CR Fu
ncti
on
s
O
th
ers
Fu
nc
ti
on
Set
u
p
Recordi
n
g
Signal Information
You can check the detailed information of the current
DVB channel.
1
Follow steps
1
to
3
in “Auto Tuning
(DVB)” on page 25.
2
Select “Signal Information” using
[
U / D], then press [ENTER / OK].
• Signal Information display will appear.
3 Press [SETUP] to exit.
• “Signal Information” is not available for
analogue channel and external input (AV1/AV2/
AV3/DV(AV4)).
• “Signal Information” is also not available while
the Pincode input field for locked DVB channel
is displayed.
TV View Operation
The following operations are available while viewing
TV channels through this unit’s tuner.
Selecting the TV Aspect Ratio
You can select the TV aspect ratio to match the format
of the programme you are playing back with the unit
and that of your TV screen (4:3 standard or 16:9 wide
screen TV).
1 In stop mode, press [SETUP]. Select
“General Setting” using [
U / D],
then press [ENTER / OK].
2
Select “Video” using [ U / D], then
press [ENTER / OK].
3 Select “TV Aspect” using [ U / D],
then press [ENTER / OK].
4
Select the desired option using
[
U / D], then press [ENTER / OK].
5 Press [SETUP] to exit.
Hint
If you have a standard TV:
• Select “4:3 Letter Box” for a full width picture
with black bars at the top and bottom.
• Select “4:3 Pan & Scan” for a full height picture
with both sides trimmed.
If you have a wide screen TV:
• Select “16:9 Wide”.
DVB
15 CITV
80%
90%
Signal
Quality
DVB-T 8M England
Frequency 474000KHz A.PID 0274
Bandwidth 8M V.PID 0273
P.PID 0512
12:00-15:00 CITV 576i
15:00-18:00 CITV 576i
General Setting
Playback
Display
Video
Recording
Clock
Channel
DivX
HDMI
Reset All
TV Aspect
Video out
TV Aspect
4:3 Letter Box
4:3 Pan & Scan
16:9 Wide
E9NG1BD_EN.book Page 29 Monday, April 7, 2008 5:54 PM