Toshiba Satellite Pro P100 (PSPAE) - Manual (Page 44)

2-8 User’s Manual
The Grand Tour
DC IN LED The DC IN LED indicates the computer is
connected to the AC adapter and it is plugged
into an AC power source.
Power LED The Power LED flashes amber while the system
is in Standby mode. The LED turns off when the
computer is turned off or in hibernation mode. In
normal operating mode, the LED is blue.
Battery LED The Battery LED indicates the battery’s current
charge/discharge status. It lights blue when the
battery is fully charged. It lights amber while the
battery is being charged from the AC adapter. It
flashes amber when the battery capacity is low.
Hard Disk Drive LED The Hard Disk Drive LED indicates that the Hard
Disk Drive is being accessed. Every time your
computer runs a program, opens a file, or
performs some other function in which it must
access the Hard Disk Drive, this light goes on.
Multiple Digital
Media Card Slot
Access LED
The Multiple Digital Media Card Slot Access LED
lights up when the Multiple Digital Media Card is
accessed.
Left and Right
Speakers
The audio speakers.
Display Screen The LCD displays high-contrast text and
graphics. Refer to Appendix B. When the
computer operates on the AC adapter the display
screen’s image will be somewhat brighter than
when it operates on battery power. The
brightness level is intended to save battery
power.
To prolong the life of your display screen, use a screen saver when you’re
not working with the computer and it is idle.
Power Button Press the power button to turn the computer’s
power on and off.
Internet Button Press the Internet button to open your default
web browser.
The button setting can be changed in TOSHIBA
Controls properties. To access the TOSHIBA
Controls properties, click Start, click the Control
Panel, click Printers and Other Hardware and
select the TOSHIBA Controls icon.