Toshiba AT10LE-A - Manual (Page 27)

Figure 4-1 Digitizer Pen
3
2
1
1. Eraser button 2. Side button
3. Pen point
Eraser button You can use this button as an eraser in some
applications that support eraser function. These
applications enable you to select and delete
notes or sketches with a one-touch action.
Side button You can use this button as function button. The
function will be defined by each application.
Pen point You can use pen point to operate same like as by
your finger.
Observe the following precautions on the handling of the Digitizer Pen.
In order to avoid damages to the display screen, please refrain from
doing anything other than the specified operation methods. Failure to
do so could cause a malfunction or characteristic deterioration.
Do not tap or press the Digitizer Pen forcefully against the display as
this could damage the Digitizer Pen and the screen itself.
Avoid using or keeping the Digitizer Pen in areas where the
temperature can change rapidly or in places, such as a car, where the
Digitizer Pen is exposed to direct sunlight. Store the Digitizer Pen
without any pressure being applied to the buttons. Failure to do so
could cause a malfunction or characteristic deterioration.
The Digitizer Pen is composed of precision parts. Do not drop the
Digitizer Pen. Strong impact causes a malfunction or characteristic
deterioration.
Do not apply excessive force to the Digitizer Pen point and the side
buttons. Excessive force applied to these parts causes short life or
characteristic deterioration.
Avoid water entering the Digitizer Pen or condensation forming within
it as either condition will cause a malfunction.
Do not disassemble the Digitizer Pen. It causes maladjustment or
short life.
User's Manual 4-2