Toshiba AT10LE-A - Manual (Page 93)

Problem Procedure
You cannot read a
file Check to ensure the required file is actually on the
memory media card that is inserted into the tablet.
If you are still unable to resolve the problem,
contact TOSHIBA Support.
USB device
In addition to the information in this section, please also refer to the
documentation supplied with your USB device.
Problem Procedure
USB device does not
work Remove the USB device from the convert cable
and reconnect it to ensure it is firmly attached.
Sound system
In addition to the information in this section, please also refer to the
documentation supplied with your audio device.
Problem Procedure
No sound is heard Adjust the volume.
Check the software volume settings.
Check to see if system sound is muted.
Check to make sure the headphone connection is
secure.
Recorded sound
volume is low Disable Toshiba Noise Suppressor setting.
Disable Toshiba Beamforming setting.
Recorded sound
quality is not good Disable Toshiba Noise Suppressor setting.
Disable Toshiba Beamforming setting.
Recorded sound is
not stereo Check the application supports stereo recording.
Disable Toshiba Beamforming setting.
Wireless LAN
If the following procedures do not restore LAN access, consult your LAN
administrator.
User's Manual 8-3