Wireless lan, Disconnecting lan cable – Toshiba Satellite 2430-301 User Manual

Page 85

Advertising
background image

Operating Basics

Satellite 2430 Series

4-18

Satellite 2430 Series

Version

1

Last Saved on 04/04/2003 13:35

ENGLISH using Euro_M.dot –– Printed on 04/04/2003 as IM_243EN

Disconnecting LAN cable

To disconnect the LAN cable, follow the steps below.
1.

Pinch the lever on the connector in the computer’s LAN jack and pull
out the connector.

2.

Disconnect the cable from the LAN hub in the same manner. Check
with your LAN administrator before disconnecting from the hub.

Wireless LAN

The wireless LAN is compatible with other LAN systems based on Direct
Sequence Spread Spectrum radio technology that complies with IEEE
802.11 wireless LAN standard (Revision B). It supports the following
features:
This is a Certification Mark of the Wireless Ethernet Compatibility Alliance,
Inc.

Automatic Transmit Rate Select mechanism in the transmit range of
11, 5.5, 2 and 1 Mbit/s.

Frequency Channel Selection (2.4 GHz)

Roaming over multiple channels

Card Power Management

Wired Equivalent Privacy (WEP) data encryption, based on the 128 bit
RC4 encryption algorithm as defined in the IEEE 802.11 standard on
wireless LANs.

Wake-up on LAN does not function on a wireless LAN.

Advertising
This manual is related to the following products: