Toshiba Satellite 31 - Manual (Page 108)

User's Manual Troubleshooting 8-13
Version
7
Last Saved on 16/10/00 18:34
Satellite 30DVD/35DVD – S30DVD_UK.doc – ENGLISH – Printed on 16/10/00 as IM_30UK
The LAN function doesn't work
I can't connect to the network
The network settings are not correct.
Please follow the steps below:
‰
Check the Windows network settings
‰ Check the settings for the counter party's network device (HUB)
‰ Check the cable
The LAN function is disabled.
Please follow the steps below:
1. Open the Control Panel and double click on System
2. In the Device Manager tab, click on the + that is left of Network
Adaptors
.
The items are displayed when the + is replaced by a -
3. Among the displayed items, click on Accton EN2242 Series
Mini-PCI Fast Ethernet Adaptor
.
4. Click on the Properties button.
5. In Device usage of the General tab, uncheck (remove the mark ) the
item Disable for this hardware profile
6. Click on the OK button.
The System Properties screen returns.
7. Click either on the OK button or on the Close button
USB devices
I can't use the USB device
The system does not support the USB device.
You cannot use USB devices with your operating system (OS). Please
refer to the manual of your USB device.
It is not connected properly. Please check if the cable connection between
the computer and the USB device is correct.
The driver is not installed correctly.
Please run the "Add new hardware wizard".
1. Open the Control Panel and double click on Add new hardware
2. Click on the Next button
Please follow the instructions on the screen.
Restart Windows.