Toshiba Magnia 3200 - Manual (Page 67)

If you click the [Edit] button while the Filter Settings tab is active, the screen shown below is
displayed. You can register the condition you want to select from the Event Log.
Configure Alerts screen (Filter Settings - Edit)
Item Explanation
[Logfile] radio button
. Select the type of log file
vent Type] check
box
Select the target event type(s).
Specify one or more types. At least one type must be selected. [E
[Event Source] edit Specify the source name(s).
a comma box When specifying two or more sources, separate them with
“,”. Wild cards (“*” and ”?”) can be used. If no source is specified,
all sources are applicable. Source name(s) can be specified with up
to 128 characters.
[Event ID] edit box Specify the event ID. When specifying two or more event IDs,
separate them
ma “,”. Up to 16 event IDs can be
specified. Use a hyphen “-” to specify a range. If no event ID is
eve applicable.
with a com
specified, all nt IDs are
[Descriptio
edit box
Specify the desc
ord ca ecified with up to 64 characters.
n Keyword] ription keyword.
The keyw n be sp
[Data Filter
box
cify the data ytes in hexadecimal.
o 64 charac ta can be specified.
Bytes] edit Spe filter b
Up t ters of da
[Data Filte
box
ecifyin data filter bytes, specify the data filter offset
position in decimal notation.
If no data offset is specified, all offsets are applicable.
r Offset] edit When sp g a
[Event Merging Specify the “Event Merging Interval” in seconds.
Interval] edit box
[Clear] button Resets the data to their initial state.
[Set] button Sets the specified data.
57