Setting the auto start mode, Adjusting 2d to 3d depth, Setting the 3d pin code – Toshiba YL985 User Manual

Page 31

Advertising
background image

31

CONTROLS AND FEATURES

English

Controls what the TV does when it detects a 3D signal.

a

Press MENU /

C

c

to highlight Setup icon.

b

Press

B

/

C

c

to highlight Preferences icon and

press OK.

c

Press

B

or

b

to select 3D Setup and press OK.

d

Press

B

or

b

to select 3D Auto Start.

e

Press

C

or

c

to select 3D, 2D, or Off.

You can adjust the level of 3D.

From the Menu:

a

In the Preferences menu, press

B

or

b

to select 3D

Setup and press OK.

b

Press

B

or

b

to select 2D to 3D Depth and press OK.

c

Press

C

or

c

to select 1, 2, 3, 4, or 5.

The higher the number, the stronger the 3D effect.

From the Quick Menu:

a

Press QUICK on the remote to open the Quick Menu.

b

Press

B

or

b

to select 2D to 3D Depth and press OK.

c

Press

C

or

c

to select 1, 2, 3, 4, or 5.

The higher the number, the stronger the 3D effect.

NOTE: Depending on the content, setting the 3D effect to a
high level may result in blurring of the image contours and
background.

A 3D PIN code is necessary for using 3D Safety Settings.

To enter a new PIN code:

a

In the Preferences menu, press

B

or

b

to select 3D

Setup and press OK.

b

Press

B

or

b

to select 3D PIN and press OK.

c

Press the number buttons to enter a 4-digit number.
Confirm the code.

NOTE: PIN code cannot be set to “0000”.

To change or delete your PIN code:

a

In the Preferences menu, press

B

or

b

to select 3D

Setup and press OK.

b

Press

B

or

b

to select 3D PIN and press OK.

c

Press the number buttons to enter your 4-digit PIN
code.

d

Select Change PIN or Delete PIN and press OK.

NOTE:
• PIN code cannot be set to “0000”.
• If PIN is deleted, 3D Safety Settings is grayed out,

and the settings are reset to the factory default.

Setting the auto start mode

Option

Description

3D

Displays as 3D mode automatically when 3D
format signal is received.

2D

Displays as 2D mode automatically when 3D
format signal is received.

Off

Displays a screen that allows you to select 3D
or 2D when 3D format signal is received.

Adjusting 2D to 3D Depth

Recording Setup

Off

Auto

Network Setup

Teletext

TV Guide Selection

Network Device Setup

Network Lock

3D Setup

Preferences

HDMI CEC Control Setup

If you experience any abnormal sensation or feel fatigue or
nausea when viewing 3D images, stop watching and rest
until the symptoms subside. Before viewing again, adjust
the 3D effect to a lower number and view at a level at which
the symptoms do not occur.

Setting the 3D PIN code

Advertising