Setting 3d start message, Setting 3d lock, Setting 3d timer lock – Toshiba YL985 User Manual
Page 32: Setting enable 3d timer, Displaying 3d important info, Switching left and right images
32
CONTROLS AND FEATURES
English
When this feature is set to On, a message is displayed onscreen
when a 3D signal is received.
a
In the Preferences menu, press
B
or
b
to select 3D
Setup and press OK.
b
Press
B
or
b
to select 3D Safety Settings and press
OK.
c
Enter your 4-digit 3D PIN code.
d
Press
B
or
b
to select 3D Start Message.
e
Press
C
or
c
to select On or Off.
When this feature is set to On, you must enter 3D PIN code for
changing display mode.
a
In the Preferences menu, press
B
or
b
to select 3D
Setup and press OK.
b
Press
B
or
b
to select 3D Safety Settings and press
OK.
c
Enter your 4-digit 3D PIN code.
d
Press
B
or
b
to select 3D Lock.
e
Press
C
or
c
to select On.
When the 3D Timer Lock feature is set to On, neither the PIN input
window nor the 3D start message will be shown while the 3D
Enable timer is active, even if a switch to 3D Mode occurs. This
helps to avoid asking for the 3D Lock PIN and displaying 3D start
message every time when switching to 3D.
NOTE: This feature cannot be selected until the 3D PIN is set.
a
In the Preferences menu, press
B
or
b
to select 3D
Setup and press OK.
b
Press
B
or
b
to select 3D Safety Settings and press
OK.
c
Enter your 4-digit 3D PIN code.
d
Press
B
or
b
to select 3D Timer Lock.
e
Press
C
or
c
to select On.
This feature helps to remind you not to watch 3D video for
extended periods of time. Once a set period of time has passed, a
dialogue will be shown asking you if you wish to continue
viewing or not.
a
In the Preferences menu, press
B
or
b
to select 3D
Setup and press OK.
b
Press
B
or
b
to select 3D Safety Settings and press
OK.
c
Enter your 4-digit 3D PIN code.
d
Press
B
or
b
to select Enable 3D Timer.
e
Press
C
or
c
to select 30, 60, 90, or 120 minutes.
f
To cancel the timer, select Off.
a
In the Preferences menu, press
B
or
b
to select 3D
Setup and press OK.
b
Press
B
or
b
to select 3D Important Info and press
OK.
The left and right eye shutter timing of the glasses can be
swapped. If 3D images look blurred, switch the left and right sides
of the 3D image.
a
Press QUICK on the remote to open the Quick Menu.
b
Press
B
or
b
to select 3D Settings and press OK.
c
Press
B
or
b
to select Left and Right Image.
d
Press
C
or
c
to select Swapped.
Setting 3D Start Message
Setting 3D Lock
Setting 3D Timer Lock
Setting Enable 3D Timer
Displaying 3D Important Info
Switching left and right images