Esata device – Toshiba Satellite L500D User Manual
Page 153
 
User’s Manual
9-15
L500/L505/L500D/L505D
eSATA device
In addition to the information in this section, please also refer to the 
documentation supplied with your 
Additional memory module
Please also refer to Chapter 8,
for further information on
installing and removing memory modules.
Problem
Procedure
eSATA device does 
not work
Remove the eSATA device from the computer 
and then reconnect it to a free port it in order to 
ensure it is firmly attached.
A connected eSATA device may not be 
recognized if it is connected to the computer’s 
eSATA/USB combo port while the computer is in 
Sleep Mode or Hibernation Mode. If this occurs, 
disconnect the eSATA device and then 
reconnect the device while the computer is 
turned on.
Ensure that any required eSATA device drivers 
are properly installed - to achieve this you should 
refer to both the device documentation and the 
operating system documentation.
If you are still unable to resolve the problem, 
contact your reseller, dealer or service provider.
Problem
Procedure
If there is a memory 
malfunction, the Power 
indicator will repeatedly 
flash (on for 
0.5 seconds, off for 
0.5 seconds) in the 
following patterns:
If there is an error in 
only slot A or no 
memory module is 
inserted in Slot A: 
amber twice, then green 
once.
If there is an error in 
Slot B: amber once, 
then green twice.
If there are errors in 
both Slot A and Slot B: 
amber twice, then green 
twice.
In the event of Power indicator flashes when the 
computer is turned on you should initially ensure 
that the installed memory module(s) are 
compatible with the computer. If you determine 
that an incompatible module has been installed, 
you should follow the steps as detailed below:
1. Turn off the computer.
2. Disconnect the AC adaptor and all peripheral
devices.
3. Remove the battery pack.
4. Remove the incompatible memory module.
5. Install the battery and/or connect the AC
adaptor.
6. Turn on the computer.
If you are still unable to resolve the problem, 
contact your reseller, dealer or service provider.