Turning on the power, Starting up for the first time – Toshiba Satellite T230 User Manual
Page 23
User’s Manual
1-7
T210/T230
Turning on the power
This section describes how to turn on the power - the Power indicator will
then indicate the status. Please refer to the
section in Chapter 6,
, for more information.
1. Open the display panel.
2. Press and hold the computer’s power button for two or three seconds.
Figure 1-5 Turning on the power (T210)
Starting up for the first time
The Windows 7 Startup Screen will be the first screen displayed when you
turn on the power. Follow the on-screen instructions on each screen in
order to properly install the operating system.
■
After you turn on the power for the first time, do not turn it off until you
have set up the operating system. Please refer to the section
for more information.
■
Volume cannot be adjusted during Windows Setup.
1
1. Power button
When it is displayed, be sure to read the
Software License Terms
carefully.