Toshiba Satellite T230 - Manual (Page 65)

User’s Manual 3-21
T210/T230
8. Seat the memory module cover in place and secure it with the screw.
Figure 3-8 Seating the memory module cover (T210)
Figure 3-9 Seating the memory module cover (T230)
9. Install the battery pack - refer to Replacing the battery pack section in
Chapter 6, Power and Power-Up Modes , if required.
10. Turn your computer over.
11. Turn the computer on and make sure the added memory is recognized -
to confirmed it, Start -> Control Panel -> System and Security ->
System icon.
Align the grooves along the edges of the memory module with the locking
tabs on the connector and insert the module into the connector firmly - if
you find it difficult to install the memory module, gently prise the locking
tabs outwards using the tip of your finger.
Please also ensure that you hold the memory module along its left and
right hand edges - the edges with the grooves in.
Take care to ensure that the memory module cover is firmly closed.
1
2
1
2
1. Memory module cover
2. Screw