Toshiba Portege Z930-F - Manual (Page 97)

TOSHIBA System Settings window
The TOSHIBA System Settings window contains a number of tabs to allow
specific functions of the computer to be configured.
In addition there are also three buttons: OK, Cancel and Apply.
OK Accepts your changes and closes the TOSHIBA
System Settings window.
Cancel Closes the window without accepting your
changes.
Apply Accepts all your changes without closing the
TOSHIBA System Settings window.
Some options shown in grey are possible to confirm their status.
General
This window displays the installed BIOS version, date and EC version.
Set all settings to
default Return all values to the factory default settings.
Sleep and Charge
This tab allows you to set advanced features when the power of the
computer is turned OFF. "Power OFF" includes Sleep Mode, Hibernation
Mode or shutdown state.
It also displays the remaining battery capacity.
Sleep and Charge
Your computer can supply USB bus power (DC5V) to the USB port even
when the computer is turned OFF.
This function can be used for ports that support the Sleep and Charge
function.
The port with the icon ( ) has Sleep and Charge function. You can use
the Sleep and Charge function to charge certain USB-compatible external
devices such as mobile phones or portable digital music players.
Move the slider to enable or disable this function.
Enabled Enables the Sleep and Charge function. Then
you can use this function to charge certain USB-
compatible external devices such as mobile
phones or portable digital music players.
Disabled Disables the Sleep and Charge function.
User's Manual 5-9