Starting the computer by password, Power-up modes – Toshiba Satellite L750D User Manual
Page 124
User’s Manual
6-11
Power and Power-Up Modes
Starting the computer by password
To start up the computer with the user password, follow these steps:
1. Turn on the power as described in Chapter 1,
. The
following message will appear in the screen:
Enter Password [ ]
2. Enter the Password.
3. Press ENTER.
Power-up modes
The computer has three different power-up modes as follows:
■
Shut Down Mode: The computer will shut down without saving data - in
view of this you must always save your work before you turn the
computer off.
■
Hibernation Mode: Data in memory will be saved to the hard disk drive.
■
Sleep Mode: Data will be maintained in the computer's memory.
Windows utilities
You can configure various settings associated with both Sleep Mode and
Hibernation Mode within the Power Options (to access it, Start Control
Panel System and Security Power Options).
Hot keys
You can use the FN + F3 hot key to enter Sleep Mode or FN + F4 to enter
Hibernation Mode - please refer to Chapter 5,
for further
details.
At this point, the hotkeys FN + F1 to F9 do not work. They will function
after you enter the password.
If you enter the password incorrectly three times in a row, the computer
shuts off. In this case, you must turn the computer back on to retry
password entry.
Please refer to the sections
in Chapter 1,
for further information.