Toshiba Satellite L750D - Manual (Page 80)

User’s Manual 4-10
Operating Basics
How to remove discs when the disc tray will not open
Pressing the eject button will not open the disc tray when the computer
power is off. If the power is off, you can open the disc tray by inserting a
slender object (about 15 mm) such as a straightened paper clip into the
eject hole near the eject button.
Manual release with the eject hole
Writing CD/DVD/Blu-ray™ discs
You can use the Blu-ray™ Writer drive to write data to either CD-R, CD-
RW, DVD-R, DVD-R (Dual Layer), DVD-RW, DVD+R, DVD+R (Double
Layer), DVD+RW, DVD-RAM, BD-R, BD-R (Dual Layer), BD-RE or BD-RE
(Dual Layer) discs.
You can use the Blu-ray™ Combo/DVD Super Multi drive to write data to
either CD-R, CD-RW, DVD-R, DVD-R (Dual Layer), DVD-RW, DVD+R,
DVD+R (Double Layer), DVD+RW or DVD-RAM discs.
TOSHIBA Disc Creator and Corel Digital Studio are provided as writing
software with this computer.
Corel Digital Studio can be used to write files in video format. TOSHIBA
Disc Creator can be used to write data.
1. Eject hole
1
Turn off the power before you use the eject hole. If the disc is spinning
when you open the disc tray, the disc could fly off the spindle and cause
injury.
■ Some models in this series are equipped with a Blu-ray™ Combo/Blu-
ray™ Writer drive which can write CD/DVD/Blu-ray™ discs.
■ Some models in this series are equipped with a DVD Super Multi drive
which can write CD/DVDs.