Toshiba WL968 - Manual (Page 39)

39
CONTROLS AND FEATURES
Engl
ish
DNR allows you to “soften” the screen representation of a weak
signal to reduce the noise effect.
a
Select DNR from the Noise Reduction menu.
b
Press C or c to select Low, Middle, High, Auto or Off.
The differences may not always be noticeable (for the
best result use lower settings as picture quality can be
lost if the setting is too high).
The Resolution+ feature allows you to adjust the clarity levels
for your desired picture settings.
a
In the Advanced Picture Settings menu, press B or
b
to select Resolution+ and press OK.
b
Press C or c to select On.
NOTE:
• This feature may not work properly depending on the
content.
• Noise may appear in the picture depending on the device
connected to the TV (e.g. a device with a specific enhancer
function).
This feature will reduce picture blur without decreasing image
brightness or adding flicker.
a
In the Advanced Picture Settings menu, press B or
b
to select Clear Scan.
b
Press C or c to select High, Middle, Standard or Off.
NOTE: When Picture Mode is set to Game, this feature will be
grayed out and automatically set to Off.
This feature allows you to reset the current Advanced Picture
Settings to the default values.
a
In the Advanced Picture Settings menu, press B or
b
to select Reset.
b
Press OK.
This feature is available when the Picture Mode option is
Standard, Hollywood Day, Hollywood Night, and
Hollywood Pro.
Test Pattern
When the test pattern is on screen, you can navigate in the
Picture submenus and adjust picture settings without
removing the image.
When you move to a non-Picture menu, or close the menus,
regular video will be restored.
a
In the Picture menu, press B or b to select Expert
Picture Settings and press OK to display Expert
Picture Settings menu.
b
Press
B
or
b
to select Test Pattern.
c
Press
C
or
c
to select On.
d
Press EXIT to close.
RGB Filter
This feature individually enables or disables the red, green,
and blue components of the picture to allow for more
accurate adjustment of each colour.
a
In the Expert Picture Settings menu, press
B
or
b
to
select RGB Filter and press OK.
b
Press
B
or
b
to select Red, Green or Blue to adjust.
c
Press
C
or
c
to select On.
d
Press
B
or
b
to select Colour or Tint and press
C
or
c
to adjust.
e
Press EXIT.
NOTE: It is not possible to turn off all three colours
simultaneously.
Colour Decoding
If you view DVDs with this TV, the Colour Decoding option
may be set to ensure the colourimetry reproduction.
NOTE: The modes excluding Auto (BT601 and BT709) are to
convert an irregular signal output from the DVD etc. with
incorrect colour to the optimum state. If BT601 or BT709 is
selected with a normal signal received, the colour may not be
correctly displayed. This feature should normally be set to
Auto.
a
In the Expert Picture Settings menu, press
B
or
b
to
select Colour Decoding.
b
Press
C
or
c
to select Auto, BT601 or BT709.
DNR – Digital Noise Reduction
Resolution +
Clear Scan
Resetting the advanced picture settings
Expert Picture Settings