Media renderer setup, Device name setup, Usb hdd record function – Toshiba WL968 User Manual

Page 50: Media renderer setup device name setup

Advertising
background image

50

CONTROLS AND FEATURES

En

glis

h

• The power consumption during Active Standby is more

than it during Normal Standby.

• After the change from Power On state to Active Standby,

there may be a period of several ten seconds which does
not receive the operation from a remote control or external
apparatus.

The TV can be configured as a Media Renderer(DMR). When

operating as a DMR, the TV displays content provided by a DMS.

The selection of the media is done by DMC.

The TV can play photo, movie, or audio files when operating as a

DMR.

a

In the Preferences menu, press

B

or

b

to select

Network Device Setup and press OK.

b

Press

B

or

b

to select Media Renderer Setup and

press OK.

c

Press

B

or

b

to select Media Renderer and press

C

or

c

to select On.

If request come from DMC, prompt will appear and DMR will
start.

To exit the Media Renderer:

Press EXIT.

Terminology

DMS: DLNA CERTIFIED™ Server

DMR: DLNA CERTIFIED™ Renderer

DMC: DLNA CERTIFIED™ Controller

NOTE: You cannot use 3D function in operating as a DMR.

The TV’s device name can be changed.

a

In the Preferences menu, press

B

or

b

to select

Network Device Setup and press OK.

b

Press

B

or

b

to highlight Device Name Setup and

press OK.

c

Highlight the Device Name field and press OK. The
Software Keyboard window will appear.

d

Input the Device Name by using the software
keyboard (see page 48). Press the BLUE button.

NOTE: The Device Name can be up to 15 characters
long.

e

Highlight Done and press OK to save your setting.

USB HDD Record Function

This function can be used to record and play digital
broadcast programmes. Read the precautions
below before recording or viewing programmes
using the USB HDD record function.

NOTE:
• In order to use this function, a USB HDD needs to be

connected to the TV. Do not use USB Hub.

• After recording operation, time may take to a recording

start.

• Recorded programmes saved on the USB HDD can only be

viewed on this TV. They cannot be viewed when connected
to another TV (including the same model of TV), a PC, or
other device.

• You cannot watch one channel while recording another.

• If the recording time to the USB HDD is too short, no data

may be saved.

• You cannot record video input signals on the USB HDD.

• Not all types of broadcast may be recordable.

• After programming the TV to record digital broadcasting,

do not disconnect the power plug before recording starts.
Also, leaving the power switch “ON” until recording is
scheduled to start, may cause the recording to fail.

• Should video or audio recording fail due to malfunction of

the TV or poor reception, no compensation shall be paid.

• If there is a power failure or the power plug is disconnected

during programmed recording, recording will stop and will
not resume when the power returns or the plug is
reconnected.

• Do not disconnect the power plug when the indicator LED

is lit.

• Any changes implemented by the broadcasting station may

affect programme scheduling.

• Scheduling of multiple consecutive programmes may result

in the beginning of each programme not being recorded.

• Accurate start / finish time for recording is reliant on

broadcasters maintaining correct time stamp if this not the
case the recording will fail.

• Some broadcasters can control whether a program can be

recorded or how long you may be able to view it for after
recording. The on screen message “Retention limit expired”
means that the time limit for viewing the program has
lapsed.

• Programmed recording cannot take place if the power plug

is not connected.

• Disconnecting the power plug during recording may result

in failure to save the recorded programme.

• USB HDD recording feature is not available in all countries.

• Do not turn off the TV during recording.

• When the USB HDD is formatted, all the data stored on the

HDD will be erased.

Media Renderer Setup

Device Name Setup

Advertising