Security lock, Security lock -19, Connecting – Toshiba Qosmio X300 User Manual
Page 157: Disconnecting
User’s Manual
8-19
Optional Devices
Connecting
1. Make sure the connectors are properly aligned before you plug the
i.LINK (IEEE1394) cable into the computer.
Connecting the i.LINK (IEEE1394) port
2. Plug the other end of the cable into the i.LINK device.
Please take note of the following when you use i.LINK devices:
■
You may need to install drivers for your i.LINK devices to function.
■
Not all i.LINK devices have been tested, therefore compatibility with all
i.LINK devices cannot be guaranteed.
■
Some devices might not functions such as Sleep Mode or automatic
power off.
■
Do not connect or disconnect an i.LINK device while it is using an
application or when the computer is automatically shutting it down to
save power - doing so might cause data to be destroyed.
Disconnecting
To remove an i.LINK device, follow the steps as detailed below:
1. Open the Safely Remove Hardware icon on the Windows Task Bar.
2. Point to i.LINK (IEEE1394) device and click the left Touch Pad control
button.
3. Disconnect the cable from the computer and then from the i.LINK
device.
Security lock
A security locks enable you to anchor your computer to a desk or other
heavy object in order to help prevent unauthorized removal or theft. The
computer has a security lock slot on its left side into which you can attach
one end of the security cable, while the other end attaches to a desk or
similar object. The methods used for attaching security cables differ from
product to product. Please refer to the instructions for the product you are
using for more information.
i.LINK (IEEE1394) port
i.LINK (IEEE1394)
connector
Please be aware that you should also refer to the documentation that was
supplied with your i.LINK device.