Special features, Special features -9 – Toshiba Qosmio X300 User Manual
Page 30
User’s Manual
1-9
Introduction
Security
Special features
The following features are either unique to TOSHIBA computers or are
advanced features which make the computer more convenient to use.
Access each function using the following procedures.
*1 To access the Power Options, click Start Control Panel System
and Maintenance Power Options.
The transmission speed over the wireless LAN and the distance over
which wireless LAN can reach may vary depending on surrounding
electromagnetic environment, obstacles, access point design and
configuration, and client design and software/hardware configurations.
The Transmit Rate (at X Mbit/s) is the theoretical maximum speed under
the IEEE802.11 (a/b/g) standard. The actual transmission speed will be
lower than the theoretical maximum speed.
Legal Footnote (Wireless LAN)
For more information regarding Wireless LAN, please refer to the
section in Chapter 10 or click the *7 above.
Wireless
communication
switch
This switch turns the Wireless LAN and
Bluetooth functions on and off. Please note that
all models are provided with a Wireless
communication switch and some models are
equipped with both Wireless LAN and Bluetooth
functionality.
Security lock slot
Connects a security lock to anchor the computer
to a desk or other large object.
USB Sleep and
Charge function
This feature allows you to charge USB-
compatible external devices such as mobile
phones or portable digital music players via the
USB port when your computer is in Sleep Mode,
Hibernation Mode or in the shutdown state.
To run the HW Setup program, click Start All
Programs TOSHIBA Utilities HWSetup.
Hot keys
Hot keys are specific key combinations that let
you quickly change the system configuration
directly from the keyboard without running a
system program.
Display automatic
power off
*1
This feature automatically cuts off power to the
computer's display panel when there is no
keyboard input for a specified time, with power
being restored the next time a key is pressed.
This can be specified in the Power Options.