Toshiba Satellite Pro L100 (PSLA1) User Manual
Page 38
1-10
User’s Manual
Introduction
System Automatic
Standby/Hibernation
This feature automatically shuts down the system
in Standby Mode or Hibernation Mode when
there is no input or hardware access for a time
specified. To specify the time, click start, Control
Panel, Performance and Maintenance,
TOSHIBA Power Saver. At Basic Setup tab,
you can specify the time for System standby or
System hibernation.
Intelligent Power
Supply
A microprocessor in the computer’s intelligent
power supply detects the battery’s charge and
calculates the remaining battery capacity. It also
protects electronic components from abnormal
conditions, such as voltage overload from an
AC adaptor. You can monitor remaining battery
capacity, checking Battery remaining on
TOSHIBA Power Saver.
Battery Save Mode
This feature lets you save battery power. To
specify the power save mode click start, Control
Panel, Performance and Maintenance,
TOSHIBA Power Saver. At Profile:, you can
specify the power save mode.
Panel Power On/Off
This feature turns power to the computer off
when the display panel is closed and turns it back
on when the panel is opened. To specify the
setting, click start, Control Panel, Performance
and Maintenance, TOSHIBA Power Saver. At
Setup Action tab, you can specify the the setting
for When I close the lid.
Low Battery
Automatic
Hibernation
When battery power is exhausted to the point
that computer operation cannot be continued, the
system automatically enters Hibernation Mode
and shuts down. You can specify the setting in
the Setup Action tab in TOSHIBA Power Saver.