Toshiba WT7-C - Manual (Page 18)

Figure 2-1 Plugging the Micro-USB cable into the AC adaptor
2-pin
3-pin
Either a 2-pin or 3-pin adaptor will be included with the tablet depending on
the model.
2. Plug the other smaller connector of the Micro-USB cable into the
Micro-USB port on your tablet.
Figure 2-2 Plugging the Micro-USB cable into tablet
1
2
1. Micro-USB port 2. Micro-USB cable
The Micro-USB connector of the Micro-USB cable must be correctly
plugged into the Micro-USB port on the tablet. Failure to do so correctly
may result in possible damage to the Micro-USB port.
3. Plug the AC adaptor into a live wall outlet.
Turning on the power
This section describes how to turn on the power.
After you turn on the power for the first time, do not turn it off until you
have set up the operating system.
Volume cannot be adjusted during Windows Setup.
The tablet can not be powered on by pressing the power button if the
battery power is completely exhausted. It is recommended to charge
the battery pack by connecting the AC adaptor for 30 minutes before
turning on the power.
Press and hold the power button for 2-10 seconds to turn on the tablet.
User's Manual 2-4