Toshiba WT7-C - Manual (Page 42)

To enter the BIOS setup utility, follow the steps below:
1.
Save your work.
2. In the Settings charm, tap Power and then select Shut down .
3. After completely shut down the tablet, wait for about 10 seconds. Then
hold down the Power button and Volume up button simultaneously.
Please make sure that fast startup is disabled in the Power Options by
following the steps below:
1. Tap Control Panel -> System and Security -> Power Options under
Windows System in the Apps view .
2. Tap Choose what the power button does.
3. Tap Change settings that are currently unavailable.
4. Deselect the Turn on fast startup check box from Shutdown settings.
5. Tap the Save changes button.
To save the changes and exit the utility, select Save and Exit -> Exit
Saving Changes -> Yes. The tablet will restart immediately.
Navigating the utility
TOSHIBA Setup Utility can be navigated through the touch screen.
Some buttons on the tablet are also designated to execute the
corresponding function. Details are described as follows:
Button Function
Volume up Select an item
Volume down Select an item
System Recovery
There is a hidden partition allocated on the tablet for the System Recovery
Options in the event of a problem.
You can also create recovery media and restore the system.
The following items will be described in this section:
Creating Recovery Media
Restoring the pre-installed software from your created Recovery
Media
Restoring the pre-installed software from the Recovery Partition
Creating Recovery Media
This section describes how to create Recovery Media.
User's Manual 5-3